brought to you by Pumps & Systems

Alignment Procedure for Pump and Motor by Dial Gauge

Dear Engineers

I have heard lot about the correct alignment of pump and motor but I want the correct procedure for the alignment including all the steps by dial gauge.

If any body can send me the details on nimesh_09@yahoo.com i will bw highly thankful to you.

Regards
Nimesh Patel

▶ Reply to This

Replies to This Discussion

Permalink Reply by Gadre Ravindra Manohar on October 30, 2009 at 5:10am: I am Ravi Gadre. Are you from DR India? I will send you; ▶ Reply to This

Permalink Reply by Craig Jennings on November 11, 2009 at 11:28am: The best recommend I can give you is get the book "Shaft Alignment Handbook" by John Piotrowski, 3rd edition, ISBN# 978-1-57444-721-7.

You can order it directly at http://www.turvac.com/HTMLs/ProductHTMLs/shalhandbook.html for $155, or find it on line at amazon or ebay for less.

I think you can find this informaiton off www.acquip.com, which there is a whitepaper called "Fundamentals of Shaft Alignment"; ▶ Reply to This